High quality ignition coils manufacturer and supplier

Quality ignition coils manufacturer: Single ignition coils or also called plug well ignition coils are plugged directly onto the spark plug in the spark plug well. This means that each spark plug has its own ignition coil, which is controlled directly by the engine control unit. A modern ignition coil just looks like a rubber boot that slips onto its spark plug. Up top, there’s an electrical connector for receiving voltage and some threads to mount it securely on the engine. If you were to dissect the component, however, you would find several meters of tightly wound copper wiring that make up the coil pack. These are wrapped around an iron core which receives the 12V current to serve as an electromagnet. The energy stored in the magnetic field of the core is the energy that is transferred to the spark plug. Lastly, the whole coil pack is embedded in a resin insulator to prevent short-circuiting. The ignition coil uses a principle known as Faraday’s law of induction to produce incredible amounts of power, and the same law applies when constructing electric motors as well as generators. See extra details on ignition coil manufacturers.

The ignition coil can be found on practically every gasoline-powered internal combustion engine vehicle on the market. In fact, your car probably has several of them — one for each engine cylinder. The ignition coil uses electrical induction to supply your engine with the high voltages necessary for proper fuel combustion. That sounds like a simple task, but it’s important when it comes to your car’s fuel efficiency and reliability. Like most major components, these coils should be inspected and maintained regularly.

Principle of the ignition coil: It is composed of the main coil, a secondary coil, a magnetic core, a switching transistor and other auxiliary components. The main coil is charged by a battery, and the secondary coil is discharged by a spark plug to ignite, and the triode is responsible for switching. The charging time is controlled by the battery voltage and the engine speed to ensure that the energy is consistent each time. The ignition coil has two types: 3-wire and 4-wire. The 3-wire is the power supply positive, negative, switch control (ECU command), and the 4-wire has one more ignition detection. Wire can detect whether the spark plug is ignited (whether there is discharge current in the secondary coil). Haiyan ignition coil manufacturer has many offices in other countries. One of the larger productive enterprises.

The primary winding of an ignition coil will typically contain 150 to 300 turns of wire; the secondary winding will typically contain 15,000 to 30,000 turns of wire, or around 100 times more than the primary winding. The magnetic field is initially created when the vehicle’s electrical system applies approximately 12 volts to the ignition coil’s primary winding. When a spark is required at a spark plug, the ignition system will switch off the current flow to the primary winding, which will cause the magnetic field to collapse. The collapsing magnetic field will induce a voltage into the primary winding in the region of 200 volts; but the voltage induced into the secondary winding will be approximately 100 times greater, around 20,000 volts.

The first coil-based ignition system is credited to the American inventor Charles Kettering, who developed a coil ignition system for a major vehicle manufacturer around 1910/1911. For the first time, he devised an electrical system that powered the starter motor and ignition at the same time. The battery, a generator and a more complete vehicle electrical system provided a relatively stable electrical supply to the ignition coil. The Kettering system used a single ignition coil to produce a high voltage, which was passed to a rotor arm that effectively pointed the voltage to a series of electrical contacts located in the distributor assembly (one contact for each cylinder). These contacts were then connected by spark plug wires to the spark plugs in a sequence that made it possible to distribute the high voltage to the spark plugs in the correct cylinder firing order.

The products are produced by Haiyan hardware accessories manufacturer. It is highly resistant to temperature and heat. The manufactured hardware accessories have such merits of as to be used in the area. It is highly resistant to temperature and heat. Haiyan hardware accessories supplier has developed a broad market at home and abroad with its excellent quality, fast delivery, and timely and thoughtful service. It is highly resistant to temperature and heat. See more info on hj-auto.com.

Haiyan car ignition coil manufacturers have professional production workshops and great production technology, our main product is the car ignition coil, automotive ignition coil and engine coil. The Haiyan car ignition coil with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. Our automotive ignition coil is also available in a wide range of types and specifications. Haiyan ignition coil supplier will try our best to meet Customers’ needs.