Led lighting systems and aluminum profiles providers with Reboline
Led profile light and aluminum profiles providers with Reboline? Superior safety may be the most significant benefit of LEDs. LED lamps generate almost no warmth therefore they are cool to the touch and can be left on for hours without incident or consequence if touched. LEDs produce 3.4 btu’s/hour compared to 85 for incandescent bulbs. In contrast, amoureux lighting expels 90% of the energy it utilizes via heat, making the bulbs hot to the touch. LEDs reduce the potential for safety dangers, such as burns and fires. LEDs are made of non-toxic materials, unlike neon lighting that use mercury that may pose a danger to the environment. LED is recyclable and also considered “green”, or earth-friendly. LED lighting are offered in a variety of base colors, such as red, blue, and amber. Due to the fact that traditional incandescent bulbs use filters to produce colors, they are extremely bad. LEDs can be mixed together to produce large numbers of color options.
Reboline also offers: production facilities with the ability to design custom-made solutions; technical skills to provide support for individual solutions to tailor lighting components; laboratory facilities, where we have a goniometer to assess the photometric curve and a spectrometer to assess the spectral spectrum. We provide quality: Our warehouses have dozens of kilometers of different aluminum profiles and lighting components ready for shipment. ReboLine belongs to a group of lighting companies with over twenty years of experience. Our goal is to provide the highest quality aluminum profiles for LED lighting solutions and implementations. Find additional information at Led lighting systems.
Less than 10 percent of the power used by incandescent lamps is actually converted to visible light; the majority of the power is converted into infrared (IR) or radiated heat. Excessive heat and ultraviolet radiation (UV) presents a burn hazard to people and materials. LEDs emit virtually no IR or UV. Rapid advancements in LED lighting technologies, with more improvements on the horizon, have resulted in lowered costs and increased reliability of LEDs. And while it may be tempting to assume LEDs are the right choice for all applications because of their energy efficiency, selection should be based on a combination of factors, including light quality and distribution, dimmability, and expected lifetime. Today, light can do so much more than brighten our path. It can lighten our impact on the environment, make our surroundings more secure or boost comfort and productivity of any indoor space. Pairing LED lighting with intelligent sensors and controls can help build smarter, more sustainable solutions.
LEDs generally consume very low amounts of power. The statistics to look for when comparing the energy efficiency of different lighting solutions are called by one of two terms: luminous efficacy or useful lumens. These two items essentially describe the amount of light emitted per unit of power (watts) consumed by the bulb. In our experience most LED lighting retrofit projects result in a 60-75% improvement in the overall energy efficiency of the facility’s lighting. Depending on the existing lights and the particular LEDs installed, the savings could be more than 90%. You can read a few case studies here. Because LEDs are so small they can be used in virtually any application you can think of. They can be combined in bunches for a traditional bulb, used in isolation as a small device light, or strung out in sequence in a linear fashion. Just about everything you can think of can be done with LEDs. Find additional details on https://reboline.com/.