Cobblestone retaining wall building in Colorado
Stone retaining wall construction in Colorado: First of all, what is No Fines Concrete (NFC)? Basically it is just what the name suggests, concrete without any fine aggregates or sand. It consists of generally an aggregate (gravel), cement and water. The aggregate is coated with the cement slurry binding it together, it dries with the strength of concrete but with voids or air pockets. This makes the NFC light weight and allows water to pass through its honeycomb texture.
Get the first course right. Use a torpedo level to level each block front to back and either a 4-foot or 6-foot level to keep each course level and even. Set the blocks with a heavy rubber or plastic mallet. Getting the first course flat and level is extremely important, so take your time. Try to lay the course as close to the center of the trench as possible. Even a small pebble on the surface of a block will throw the one above it out of alignment. And that crooked block will affect the one above it, and so on. That little stone could eventually create an unattractive hump in the top course.
A wall that leans into the soil it retains is less likely to be pushed outward by soil pressure than a plain-old vertical wall. Design and build your retaining wall to slope at a minimum rate of one inch for every one-foot of rise (height). Fortunately, working with retaining wall blocks makes it incredibly easy to achieve this “step-back” construction! The locking flange on the bottom edge of every block guides it to click into position slightly behind the lower block, preventing the top blocks from being pushed outward.
Some of the simplest walls are “gravity” walls built of loose block. These walls depend on the mass and weight of the blocks to retain the earth. Landscape blocks are simply stacked one course on top of the other, with the joints staggered and each course slightly stepped back from the course beneath it. These small walls are used to retain small areas of earth, as seen with flower beds surrounding tree trunks. These simple designs usually work fine in a low-traffic area for a wall that doesn’t exceed about 2 feet high. Walls built with a combination of concrete block, mortar and rebar are also popular for small yard projects. The mortar and steel rods lock the blocks together for additional strength. See even more info on Colorado Retaining Wall Builder.
We also repair existing retaining walls. Many railroad tie walls or older concrete retaining walls which may or may not include rocks or boulders are beginning to show signs of failure. Often times a homeowner will build a DIY retaining wall that needs help after years of service. We serve all of Colorado out of our home office in Colorado Springs. Please feel free to reach out to us with any questions you may have. Estimates are always free and everything we touch comes with a warranty.