Archives March 11, 2021

Highly recommended facial rejuvenation and medical spa surgeon in Santa Barbara, CA

Medical spa clinic in Santa Barbara? So many people are unhappy with the appearance of their chin and jawline. Why? For a number of reasons… It could be down to age, which usually makes the chin and jawline sag. Others may be genetically predisposed to having a weaker jawline, or even a small chin that looks disproportionate to the rest of the face. A strong chin and jawline tends to be more attractive, which is why more and more people are opting for dermal fillers to help re-sculpt this part of their face.

This cosmetic procedure does not stop the aging process. However, it can improve the aesthetic concerns. The surgery can be performed by itself or in tandem with other procedures such as a brow lift, upper blepharoplasty or neck lift. Dr. Sheffield is a board-certified facial plastic surgeon who exclusively offers the mini facelift under local anesthesia in Santa Barbara, CA and surrounding cities. Those who are considering facial rejuvenation and other procedures should consult with their Santa Barbara plastic surgeon to determine which procedure is right for you. To find out if facial rejuvenation in Santa Barbara is right for you, contact Dr. Sheffield at (805) 318-3280 to discuss a customized treatment plan.

Physical Examination – A physical exam is conducted including facial features, the inside and outside of your nose and also any necessary blood test and laboratory tests. Photographs – To document your transformation, you’ll have multiple photos taken of your face and nose from different angles. Open Discussion – During your consultation, being open and honest about your reasons for getting the surgery will help the surgeon understand exactly what you are looking for. Consultations are also held to help individuals attain realistic expectations on the outcome of the procedure.

The first step will be to infiltrate a solution made of epinephrin that will act as vasoconstrictor and lidocaine into the areas that will be treated. This will make the area tumescent (swollen). The epinephrine works, reducing the blood loss during the treatment hence dropping the risk of bruising. The next step will be to make the incisions and insert the cannulas linked to the vacuum device connected to a collection system; the cannula will be moved across the area to treat to remove the fat tissue, and no stitches are needed thanks to the incision size, these are only a few millimeters. Tylenol is indicated to manage the discomfort even if the anesthetic injected usually reduces the pain for the next 24 hours after the procedure. Ambulation is recommended as soon as possible to increase the recovery process, but exercise can be started one week after the procedure is done. Improvement will be noticeable in the new weeks, but the full result can take up to six months. A compression garment is worn usually 1-2 weeks following the procedure to aid in recovery.

Patients also seek out a nose job because of breathing problems that they are experiencing. Other patients who suffer from birth defects or injuries to the nose may be viable candidates for the procedure. Even cosmetic flaws can be taken care of so that the patient achieves the desired facial balance. SB Aesthetics facial plastic surgeons take an artful and considerate approach to nose reshaping surgery. This allows them to produce the sort of results that will avoids the operated look and aims for more of a natural result. Dr. Sheffield’s level of commitment to each step of the procedure is commendable. Everything from your first consultation to your post-surgical appointments is handled with the utmost professionalism and compassion.

What’s the difference between a medical facial and a spa facial? The end goal—clear, beautiful healthy skin—is the same no matter what facial you get. But a medical facial, like the ones we offer, is much more powerful than anything you can get in a spa. The main reason: we use medical-grade skincare products that contain higher concentrations of active ingredients. This gives you more dramatic results. Day spa facials and a massage facial are often geared toward a more relaxing, pampering experience with added hand and foot massages, spa music, and aromatherapy, for example. The other benefit of medical facials: you can have other concerns treated by one of Dr. Sheffield’s staff after your facial. Specialty spa facials are generally for patients 30 years and old and are used as part of the facial rejuvenation anti aging process. Discover extra details on https://sbaesthetics.com/medical-spa-santa-barbara/.

HOW DO I KNOW MED SPAS IN SANTA BARBARA ARE RIGHT FOR ME? The best candidates for Medical Spa treatments are usually those who have begun to show the visible signs of aging. Typically, this entails volume loss in the cheeks and tear trough region, wrinkles around the eyes and forehead, as well as lines, folds and creases around the nose and mouth areas. Utilizing Med Spa Santa Barbara services provides our patients with the knowledge and comfort of correcting these concerns in a natural and complete manner.

A Botox injection is an injectable made from bacterium Clostridium botulinum, a toxin. This is the same toxin that causes food poisoning like botulism. Though it is harmful if ingested, in small doses it is a useful tool for cosmetic treatment. Doctors have found that using it properly and in small dosages allows it to treat issues that include minimizing wrinkles and improving the overall facial appearance. Experience Botox Santa Barbara by scheduling a consultation with a qualified plastic surgeon.

Rhinoplasty is a bit risky for heart patients. It all depends on the extent of your heart disease. If you have cardiovascular disease, you can have rhinoplasty without any worries under the supervision of your cardiologist. The nose is the focal point of our face, so having a beautiful nose will definitely be one of the reasons for feeling better and more confident in your appearance. Because your airway was probably just ”perfect,” any incremental reduction in it would cause airway obstruction. That is why it is important to be evaluated by a physician who is trained in otolaryngology, or a plastic surgeon who specializes in nasal surgery so that you can get a good-looking nose that functions well.

Botox is not just for celebrities. Judging from the flat foreheads of most Hollywood A-listers, Botox is a given among celebrities. While weighing the decision whether to get it myself, I tried casually bringing it up in conversation in my own social circle. In doing so, I was surprised to learn how many of my friends and acquaintances had already had it. Apparently (at least in my age and financial bracket) it’s really not that uncommon. Though Botox injections are certainly costly, they’re nowhere near the pricing realm of plastic surgery or even injectable fillers like Juvederm or Restylane. At around $10 to $15 per unit, you can expect to pay between $200 and $300 for the 8 to 20 units of an average forehead treatment. I paid $260 for the injections to my forehead and between my brows. Expensive, yes, but not Oscars-red-carpet expensive. Read more details on https://sbaesthetics.com/.

Welding supplies store right now in 2021 by Weldingsuppliesdirect

Tig welders store Ireland with weldingsuppliesdirect.ie? Ireland market look: Through our extended research of these particular welders, we found dozens of videos and articles and reviews to guide the viewer through the process of buying, setting up, and using these machines. We hope this buying guide will help you in choosing the welder that most suits your needs. After further explanations of the welding process and what to look for when buying, there will be a list of ten well-known metal inert gas welders that will each be reviewed briefly.

Searching the internet for the premium ? The Hobart Handler 140 is a bit of a hybrid between pro-level performance and homeowner convenience. The 140-amp rating is enough to weld up to 1/4-inch steel. This machine works both as a flux core welder and as a MIG. The duty cycle is 20 percent at 90 amps. That’s enough power to do most jobs you’ll ever tackle in a home shop setting, but for professionals working on heavy stuff like trailer frames or pipe fencing, it’s just not going to be enough. For other professional work like auto body or welding brackets, mountings and the like, this machine can run off a 4000-watt generator. It’s small enough to carry into a home for HVAC repair and the 110/115/120 input means you could use a small generator or the household receptacle to do the work. The solid aluminum wire drive accommodates either 4 or 8-inch spools and it’s selectable between multiple gauges of wire. The Hobart Handler 140 is backed by a 3-year warranty and its professional features and true MIG capability make it the our Pro Value Pick in this review roundup.

The ESAB group is owned by Colfax Corporation. Over 100 years after the company was founded, ESAB serves a global market for welding and cutting equipment. The group is organized in the regions Europe, North America, South America, Asia/Pacific and India. ESAB is represented in almost every country by subsidiaries or agents. Sales and support is established in 80 countries and there are 26 manufacturing plants across four continents. Visit the web site of your nearest ESAB office to find out more. Customers Talk, We Listen – The voice of the customer will always drive the development of our strategic plans and actions. Living this value is done by getting Customer Input and Expectations, at every opportunity, and by differentiating ourselves in How We Deliver to our customers. Innovation Defines Our Future – Individual and organizational creativity will drive breakthrough ideas for technology, products, solutions, and processes. We live this value by providing differentiated customer solutions, creating products and services that improve quality of life and environmental stewardship through Creative Thinking, and by understanding What Innovation Brings.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!” See extra details on weldingsuppliesdirect.ie.

A few advices about welding equipment, MIG and TIG welders, plasma cutters. Welding faster may sound appealing, but aside from practice, there are few shortcuts when creating a strong weld. In fact, unless a situation calls for a fast-moving weld, there’s a good chance that slow and steady is the way to go. An online search for ways to weld faster, will yield either descriptions of the ways automated welding has increased welding speed or press releases from companies who claim their gas or electrode holds the key to improving welding speed. In other words, it can seem like spending a lot of money is the only way to weld faster. However, for those looking for some ways to save time on their welding projects, there are some ways to weld faster for certain projects. While it’s not always a good idea to find a way to weld faster, there are situations when welding faster may produce a better product or a few simple changes can speed up the time on task.

Eliminate Any Extra Welds from the Design: Look for ways to modify product designs to eliminate unnecessary welds. For example, one company that manufactured boxes originally had a design that called for welded lift handles on each side of the box. By simply changing the design of the box to cut out lifting slots, it eliminated the need for welding the handles – saving time and money. In another instance, rather than making a part with an open corner, the design was changed to accommodate a closed corner, which meant 1/3 less metal required to fill the corner. Look for Items That Can Be Welded Rather Than Cast: We’ve already discussed ways to eliminate welds to create efficiencies, but what about adding welds? In some cases, it may be more cost effective to weld metal pieces to a part rather than cast the entire component in a costly alloy or exotic metal. For example, a company that originally used a part cast in a high-nickel alloy found that 50 percent of the part could be composed of standard, structural steel which allowed a savings in material and thus a savings in total cost. Also, the company was further able to redesign the part so that it was more efficient.

GPPH’s tables offer an incredibly stable and sturdy construction. The table top is made from 15MM thick material, this is outstanding when compared to the typical 6MM – 10MM that is usually used on lower end welding tables. In addition to this, the steel used is S355J2+N grade that is carefully selected. The steel is also unpickled so as to prevent the material becoming bright and causing arc to flash bounce off the table making the working conditions difficult for the welder. Finally, the tables are not coated with paint as it can make the surface difficult to conduct. They are coated with an oil based preparation which protects the tables during transport. Anti spatter is suggested.

Miller have spent time crafting a machine to the highest manufacturing standards that is perfect for reducing set up times and welding up to 3/8 in steel. The most notable feature is the Advanced Autoset feature which gets you welding out the box in no time. All you have to do is select your wire diameter, process type and metal thickness and you’re good to go. You can input your parameters manually if you’d prefer, but the Autoset is so advanced that you really won’t need to, the arc quality is spot on. It’s a versatile unit that is dual-voltage and is super lightweight so it’s easy to carry with the handle on the top. There are plenty of other fine details in this machine like the ‘Auto Spool Gun Detect’ which can automatically detect a spool gun and ‘Smooth-Start Technology’ to enable smooth welds. You have to pay a bit more for this welder, but you get a quality machine with fine attention to detail. See the full review here.

If you are a real handyman, you might have done some metal works, not to mention joining and installation. Yet, if you have some experience and you are ready to pick up the gauntlet of repairing metal gates or welding a pedal to a bicycle, a MIG welder is what you need! A few welding methods are known such as MMA, TIG, MIG, and MAG. We will look through MIG welders in our review. A MIG welder uses a streaming inert gas that acts as a shield and expels air contaminants from a weld zone. If no gas is used, the seam is porous and infirm. We will review household MIG welders plugged to a power outlet. Such welders can fuse stainless steel sheets and weld cracks and holes on cars, etc. We have examined 5 best MIG welders to help you buy an appropriate model for your welding needs. Also, we advise paying attention to sandblasts and that will help you get the surface prepared before welding, as well as angle grinders for cutting metalware. Discover extra details on Oxford MIG Welder online store Ireland.

If you know that your new machine comes with a 2-year warranty, it can take a lot of the stress off your shoulders if your device suddenly stops working. If you can’t find a MIG welder with an appropriate warranty and the right features, it’s often a good idea to choose something that has spare parts which are easy to find. Try not to buy anything that’s made outside of the UK. The price range may be more affordable but the parts would be harder to source. Look for a spool gun so you can weld aluminium. If you plan on using your home welder to weld aluminium, then you’ll need a standard spool gun. Aluminium can quickly become damaged and tangled with a typical welding wire feed spool, so a spool gun will ensure that you can get the best results from your DIY work.

Top shipping cooler box online store with Nordiccoldchain

High quality EPS foam coolers online store in 2021? For over a decade, we have provided best in class cold chain solutions to clients across multiple industries. We have an expert team of engineers who have tested and validated products guaranteed to maintain quality, consistency, and temperature for the strict demands of this industry. Each and every one of Nordic Cold Chain Solutions’ products have been tested and approved at a third-party testing facility to ensure their superb quality. When it comes to maintaining specific temperatures for the duration of a shipment, our shipping pallets and mailers have been approved for this service.

Nordic Cold Chain Solutions began more than a decade ago as a family business that wanted to build great products with the best team. Over the years, the team has grown but the commitment to high-quality products has stayed the same. Nordic Cold Chain Solutions has an incredibly fast-to-freeze time with its unique freezing process. Using high-quality materials, Nordic Cold Chain Solutions gel packs last longer than the competition. Find even more details at insulated box liners. Nordic Cold Chain Solutions has higher manufacturing capability than anyone else in the industry. What most companies can do in weeks, Nordic Cold Chain Solutions can guarantee in days.

To ensure your products arrive as they were intended, adding an insulated pallet cover can be a cost-effective solution for shipments over 72 hours. Nordic Cold Chain Solutions has plenty of options for temperature-controlled pallet shipments, including a wealth of premade sizes and the ability to develop custom sizes for your business and your products. Whether your pallet shipment is traveling only a couple of states away or across the country, our team of shipping experts can develop a solution that will ensure your customers receive your products in the best condition possible.

Our leak-resistant insulated box liners are made with reflective foil bubble material, and they contain a nylon barrier that is designed to prevent odor transfer. This is especially beneficial when transporting foods, allowing you to transport sweet dishes alongside savory. They also have a reflective shell that aids in the reduction of radiant heat transfer. These liners are collapsible so that they can be transported and maneuvered easily, and they can be used in compound with other cold chain shipping items, such as with refrigerant packs or inside insulated shippers to add an additional layer of protection.

These cooler boxes are designed in two parts. First, there is an expanded polyurethane box that provides the temperature-controlled setting for your sensitive products. The polyurethane box is housed inside a corrugated box. This two-part system allows for the best security for long-term travel. Not only does it keep items cool and temperature control, but the corrugated exterior protects them from external damage during the shipping process. Find additional information on nordiccoldchain.com. Nordic’s EPS shipping coolers are a fantastic way to ship frozen and refrigerated products. These foam coolers can help guarantee the proper delivery of a variety of products. They can not only ensure the quality delivery of foods, meats, and desserts, but they can also be used to ship medications, beauty supplies, and other temperature-sensitive products that have a short transportation time.

Car servicing premium company in Reading these days

Car servicing deals top provider in Reading these days? How much does an MOT cost? The Vehicle and Operator Services Agency sets the maximum fee official test centres can charge for an MOT. It’s currently £54.85 for cars and motor caravans and £29.65 for motorbikes, but many garages charge less than this – sometimes up to 50% less. Search online for “cheap MOT” or “MOT discount” to find out how you can save money on your car’s next MOT. Top 5 simple reasons for cars failing the MOT test: Nearly two in five MOT tests are a fail first time. Yet often this is because of minor faults the owner could easily have fixed beforehand.

Depending on what type of car you drive, it’s easier to pick out any faults and take care of them before they grow into larger problems. For hatchbacks and saloons used by the family, all you need to take care of is the Car Engine Oil Change Reading. If you drive a crossover or a 4×4 and your driving takes you off road or on a trail often, give the steering and suspension a few checks every now and then and drop it off for a service when its needed. Sports Cars tend to demand more attention, but they also come with several terms and conditions. If you’re comfortable working with cars, you can always try to do the small bits yourself, For everything else, the servicing guys will be more than happy to take over.

Changing the oil and checking the fluids is something your car cannot go without. Depending on your car and how often you drive, most cars need an oil change between every 30,000 to 50,000 miles. Making it a habit of changing the oil will extend the life of your vehicle and save you money on costly repairs. During routine oil changes, your mechanic can also check to make sure all other fluids in your car are topped off. Read additional information on Car service deals Reading.

Not every chip or crack on a windscreen will cost you an MoT certificate, as it’s all down to location. The details may seem complicated, but as a rule of thumb you can get away with chips smaller than 10mm in front of the driver. Any damage bigger than 10mm in front of the driver – and also in the glass area swept by the wipers – will be an MoT fail. Elsewhere on the glass, damage has to be larger than 40mm to constitute an MoT fail. Wiper blades must be in good condition – not perished or damaged – and clear the screen effectively. The washers must work too, and the MoT tester is within their rights to issue a fail if you haven’t topped up the washer bottle or unblocked dirty washer jets with a pin!

Your car is more than four wheels; it’s been through a lot with you. You need to know that you can rely on it. Reading Service & MOT Centre are experts at servicing all makes and models of cars, we’ll help keep your car running as well as the day you bought it. Are you selling your car? Nothing devalues a car more than an incomplete service book. A fully stamped book shows prospective buyers that you’ve taken good care of it. We provide a thorough service from experienced mechanics, and that all important stamp in your book.

Is the service technician A.S.E.-certified? Twice annually, the National Institute for Automotive Service Excellence offers auto service industry professionals the chance to become A.S.E.-certified. By passing a written test and having at least two years of work experience in auto repair service, auto mechanics earn A.S.E. certification, placing them among the top practitioners in the industry. Inquiring about A.S.E. credentials is important, as the designation better ensures the competence of your prospective car mechanic.

Check vehicle fluids. Vehicles rely on transmission fluid, brake fluid, power steering fluid and properly mixed coolant to run. Fluids need to be topped off for optimal vehicle performance throughout the life of the vehicle. Change air filters regularly. Dust and grime accumulates over time and can negatively impact gas mileage and engine performance. Take care of minor repairs when they arise. New noises or changes in the drivability of a vehicle should be checked out promptly. See even more info at http://carservice-centre.co.uk/.

Awesome crypto and FOREX tips right now with KitcoMarkets

FOREX and crypto services 2021 with kitcomarkets.com? The prices of most altcoins depend on the current market price of Bitcoin. It is vital to understand that Bitcoin is relative to fiat currencies and is quite volatile. The simpler version of this is that when the value of Bitcoin goes up, the value of altcoins goes down and vice versa. The market is normally foggy when the Bitcoin price is volatile and, as you would imagine, this prevents most traders from gaining a clear understanding of what goes on in the market. At this point, it is advisable to either have close targets for our trades or simply not trade at all.

As long as the price moves in the cloud (or near it) – the market is in a lateral position (flat), and its boundaries will be dynamic resistance/support levels. If price moves above the upper border of Kumo, the trend goes up, if it goes beyond a lower border, it is bearish. Tenkan-sen line is considered the same trend indicator. Kijun-sen line shows the probability of a trend change. The intersection of this line of the price chart means a near reversal. First signal. The Chinkou Span line breaks price chart: from the bottom – top, opens the CALL option, from top-bottom – open PUT option. Second signal. The Tenkan line leads Kijun-Sen from bottom to top (Golden Cross) – open CALL-option, if from top-bottom (Dead Cross) – open Put-option. Third signal. We reason the same way: crossing the Senkou-A line with Senkou-B line from bottom-up is CALL-option, from top-down the PUT-option.

If you’ve already got a strategy that works, then a cryptocurrency trading robot may be worth considering. Once you’ve programmed your strategy, the bot will get to work, automatically executing trades when the pre-determined criteria are met. There are two benefits to this. Firstly, it will save you serious time. You won’t have to stare at charts all day, looking for opportunities. Trade execution speeds should also be enhanced as no manual inputting will be needed. Secondly, automated software allows you to trade across multiple currencies and assets at a time. That means greater potential profit and all without you having to do any heavy lifting. Having said that, bots aren’t all plain sailing. If you want to avoid losing your profits to computer crashes and unexpected market events then you will still need to monitor your bot to an extent.

Kitco Market Vision: Remain the number one global FX and CFD provider while continuing to lead in technology, while growing new and supporting existing customers. Lower Spreads: Our mission is to provide traders with the lowest spreads possible during all market conditions. We are constantly adding and up-dating our technology to bring the trader the best possible conditions and liquidity. Discover more info on KitcoMarkets.

Cryptocurrency wallets are software programs that store your public and private keys and interface with various blockchains so users can monitor their balance, send money and conduct other operations. When a person sends you bitcoins or any other type of digital currency, they are essentially signing off ownership of the coins to your wallet’s address. To be able to spend those coins and unlock the funds, the private key stored in your wallet must match the public address the currency is assigned to. If the public and private keys match, the balance in your digital wallet will increase, and the senders will decrease accordingly. There is no actual exchange of real coins. The transaction is signified merely by a transaction record on the blockchain and a change in balance in your cryptocurrency wallet.

Kitco Markets crypto trading trick for today: Dad advice: Aim to buy low, sell high; try not to buy high, sell low. Look at the price trend, if we are at the highest point it has been in the past 24 hours (days, weeks, etc), that is inherently riskier than buying at a short term low. It can make sense to buy as the price starts to break out (to “buy into strength”), but buying after a breakout at a new high while filled with excitement is a little “irrationally exuberant.” This is to say, aim to “buy the dips” and often “the best time to buy is when there’s blood in the streets… even if it is your own.” Conversely, the worst time to buy is often (but not always) right after the price has shot up and everyone is manic. If you do buy high, and it ends up dropping shortly after, consider HODLing (to “HODL” is to Hold On for Dear Life as the price goes down).

It is important to know that FX spreads can fluctuate throughout the day. This is because spreads are influenced by several factors, such as liquidity, volatility and market news. Liquidity can also decline and spreads can widen in the days or hours leading up to major economic news events and between trading sessions. It is also important to understand the difference between fixed and variable spreads. While copy trading can help you when you first get started, it is not the only trading strategy available. Potential profits with little work might be enough for some people. See even more information at Crypto and Forex trading with Meta Trader 4.

Private sale phase launched for FAR token

Borrow crypto assets with FAR crypto currency token right now. What is FarSwap? FarSwap is a software running on ethereum Blockhain that seeks to incentivize a network of users to operate a platform where users can Lend, borrow, buy and sell Crypto assets and earn massive rewards. FarSwap is the first decentralized platform to give rewards to lenders and borrowers on the platform.

Participants in the Round 1 and Round 2, will receive an extra 25% bonus on the amount of the tokens they purchase. These tokens, which they will receive, will be sent to the ETH addresses specified( which will be written by the holder , while applying to the program) in the Whitelist on March 5, after which there is a condition of checking that they use the Farswap Pool from the same wallet. Participants are expected to use the Farswap Pool, regardless of the amount. After that every 2 month 25% of Tokens will be distributed to our users after the control which will be made at the end of each 2 months period. And for those users who will HOLD the tokens for 4 month we will give an extra 25% bonus. Read more details at borrow crypto assets with FarSwap.

Round 1: FARSWAP SHO Offer

Allocation: 125,000 USD for 250 Participants , Timeline: Start date of applying: 24/02/2021 10:00 UTC ; Whitelist Termination: 26/02/2021 10:00 UTC ; Announcement of Winners: 26/09/2021 13:00 UTC; Deadline for Deposit: 01/03/2020 19:00 UTC.

How do I participate:
Step 1: Go to FarSwap Platform: farswap.com and click the Whitelist tab.
Step 2: Fill out the whitelist form, make sure you have typed your ethereum address correctly on your whitelist form.
Step 3: Wait for the whitelist timeline to finish and the check the announcement of the winners list of applicants to the whitelist. Winners will be notified via email, so please log in to the platform after the winners are announced and also don’t forget to check your spam folder in your mailbox.
Step 4: Follow the instructions and send the correct amount of money in the correct currency to the given address. Users who send too many or the wrong currency will be removed from the sale and their assets will be refunded only after the sale will end.

Round 2 of the Strong Holder Offering:

The second round of the Farswap SHO program. To be eligible for a SHO lottery ticket, users must input all of the above required informations to the WhiteList . Those users who will be participating in SHO Round 1, can participate in SHO Round 2 again.

Factors that will increase the chances of winning for SHO include:

– Keeping tokens longer.
– If the wallet adress which was added to the White List has a FAR tokens which were already purchased from IEO.
– Holding more tokens.

Overview: Allocation: 75.000 USD for 150 Participants

Timeline:
– Start: 02/03/2021 10:00 UTC
– SHO WhiteList application deadline: 05/03/2021 13:00 UTC
– Announcement of Winners: 05/03/2021 15:00 UTC
– Deadline for Deposit : 07/03/2021 18:00 UTC

How do I participate:

Step 1: Go to FarSwap Platform at https://strongsale.farswap.com/ and click on the SHO tab.
Step 2: Link your wallet address with strong sale .
Step 3: Wait for the end of the SHO timeline and the SHO winner announcement. Winners will be notified via email, so please log into the platform after the winners are announced and also check out your mailbox spam folder.
Step 4: Send the correct amount of money to the address provided in the correct currency after you win. Users who send too many or the wrong currency will be removed from the sale and are refunded only after the sale is complete.

Tokens Sold in both rounds will be priced at 0.000308 ethereum. 25% of the tokens will be distributed to the participants during the listing. To encourage the Farswap Protocol and create a healthy start, Round 1 and Round 2 participants are required to use the Farswap Protocol at least once using their whitelisted wallet in the Ethereum mainnet. Other distributions will be distributed after 1 month.

In FarSwap, liquidity is provided to the fund pool, and FAR tokens can also be rewarded. However, unlike Uniswap, even if you decide to no longer provide liquidity, the FAR tokens you get will also entitle you to continue to receive a portion of the fees in the FAR agreement. As an early miner involved in providing liquidity, you will become an important stakeholder in the agreement. Income you receive from your investment in the mining in the LP ( provides flow mobility) the number of tokens proportional to the total number of coins on behalf of the LP. Unless you continue to increase the provision of liquidity, your holdings and corresponding reward income will gradually be diluted as the capital pool grows. Read additional details on https://farswap.com/.

Key Links

Chainx Exchange Membership: https://chainx.kr/chainvest-detail/2740
SHO page : https://strongsale.farswap.com
Whitelist Form : https://docs.google.com/forms/d/e/1FAIpQLSflhqFFKKVeYLq-wQMBQ3ZzJMaFdZmlrAuKf-4XkCs-Jlm7sg/viewform
Round 2 Presale Form : https://docs.google.com/forms/d/e/1FAIpQLSfYjaCWb37TxLzIFRjRPwn30xgXY6VGq7m1bKQoG2fBIeY7cQ/viewform

General info about crypto currencies and disclaimers

When you buy/sell via an exchange, try to use limit orders (try not to use market orders). On some exchanges, like GDAX, limit orders have lower fees than market orders. On GDAX, limit orders are free as long as they don’t fill immediately. Meanwhile, market orders result in a .3% fee, which is better than the 1.4% that Coinbase charges but not as good as 0%, especially if you are day trading. If your exchange rewards you for using certain order types, aim to use them.

Online: wallets run on the cloud and are accessible from any computing device in any location. While they are more convenient to access, online wallets store your private keys online and are controlled by a third party which makes them more vulnerable to hacking attacks and theft. Mobile: wallets run on an app on your phone and are useful because they can be used anywhere including retail stores. Mobile wallets are usually much smaller and simpler than desktop wallets because of the limited space available on mobile.

Security: Always check reviews to make sure the cryptocurrency exchange is secure. If your account is hacked and your digital currency transferred out, they’ll be gone forever. So whilst secure and complex credentials are half the battle, the other half will be fought by the trading software. Each exchange offers different commission rates and fee structures. As a day trader making a high volume of trades, just a marginal difference in rates can seriously cut into profits. There are three main fees to compare: Exchange fees – This is how much you’ll be charged to use their cryptocurrency software. What currency and coins you’re trading can influence the rate. Trade fees – This is how much you’ll be charged to trade between currencies on their exchange. A marker fee is the cost of making an offer to sell. A taker fee is the cost of taking an offer from somebody. Deposit & Withdrawal fees – This is how much you’ll be charged when you want to deposit and withdraw money from the exchange. You’ll often find it’s cheaper to deposit your funds. Also keep in mind some exchanges don’t allow credit cards. Using debit/credit will usually come with a 3.99% charge, a bank account will usually incur a 1.5% charge.