Biscuit production line factory 2022
Biscuit making machine provider right now? Biscuit production line used for automatic making biscuits. Whole line including raw material handling, dough mixing, biscuit forming, biscuit baking, biscuit cooling, biscuit sandwich, and biscuit packing, etc. Available for one kind of biscuit made by using one production line, or a variety biscuit made by using one multifunctional production line. Normally can divide into 2 kinds(according to soft dough biscuit or hard dough biscuit). Specifically divided into 13 kinds(according to finished product). Read even more details at biscuit machinery manufacturers. Apart from the integrated system hardware service, the services Golden Bake offers include all stages: from plant design, biscuit machinery construction, manufacture, and assembly up to the smooth commissioning phase at your site. Don’t be afraid to start a new project…
Self-cleaning filter device which can operate automatically; Assurance of environmental protection and sanitation in the working area. More importantly, it has agitating bin with weighing screw. It is Specially designed fast detachable bin without sanitary dead corner, ensuring food safety. Last but not least, there is an accurate,efficient and stable metering device. It Adopt microcomputer control screw discharging mechanism, Integrate control of machine, electricity, light, and SCM and has the function of automatic quantification and automatic adjustment of measurement errors.For the function of our auto-dosing system, they are as followings: Self-suction feeding;Dust free at negative pressure; Store and mix; Measurement of discharging; Saving of labor and effort; Automatic control. As a result, our auto-dosing system has Solve three major problems in sugar crushing in food Industry.First, High labor intensity. Secondly, Heavy dust pollution, Dirty, sticky, and disorderly, and difficult in dealing with hygiene.
Due to the limitation of plant area, or the variety of goods produced.Turning machine has become an indispensable part of automatic production.But there are four problems with conventional turning conveyor. First is time of assembly. Conventional turning conveyor have complicated structure, need two workers use at least 5 hours to replace the PU belt. It need take too much time for assembly. And will waste high downtime cost. Second is maintenance cost. Conventional turning conveyor with many parts and complex structure incurs never-ending costs of replacement parts,labor and downtime. Third is hygiene & safety. The falling of worn and broken parts,lubricant infiltration etc, cold cause food pollution and safety issue. Fourth is service life. Unscientific type of drive makes PU belt stress state uneveness, which would directly shorten belt service life.
Horizontal mixing process must not develop the gluten in the flour, as this will result in a hard biscuit. Mixing is therefore done in two stages. In the first stage, all the ingredients are mixed except the flour and soda. The mixing continues until a consistent, homogenous cream is produced. It is important to keep the temperature of the dough low and chilled water is required for the mixer jacket.For the second stage,the flour and soda are added and mixed for 1minture at slow speed and 1-2minutes at high speed. The final dough temperature should be 18-22C.
These changes overlap during the baking process, but it is useful to note that the formation of the structure and texture of the biscuit will take place in the first and second temperature zone, the reduction in the moisture in the third temperature zone and the development of the color in the final temperature zone. The length of the baking oven depends on biscuit capacity customer wants. The length of the temperature zone depends on the biscuit. Different biscuit use different industrial biscuit oven. Common biscuit baking oven such as hybrid ovens and adjustable hot wind convection baking oven as below. See even more info on https://www.foodsmachine.net/.