High quality turbine mass flow meter provider
Reliable coriolis mass flow meter supplier: A mass flow meter may require more frequent maintenance, such as cleaning and calibration, than a magnetic flow meter. A magnetic flow meter, on the other hand, requires relatively little maintenance, because it has no moving parts and is not affected by wear and tear. Measurement Principle: As mentioned above, mass flow meters measure the mass of the fluid in order to determine the flow rate. While magnetic flow meters use magnetic fields to measure the flow of conductive fluids. Read additional details at turbine flow meter manufacturer.
Flow measurement of some low-viscosity oils, such as gasoline, kerosene, diesel, and heavy oil, residual oil, etc. whose viscosity is reduced by heating. Water flow measurement of large-diameter pipelines, among which the full-tube vortex flowmeter is mainly used for small and medium diameter pipes, while the insertion vortex flowmeter can be used for large-diameter (DN≥300mm) pipeline flow measurement. It is widely used in urban water pipelines and industrial water mains in chemical, electric power, metallurgy, papermaking, chemical fiber and other enterprises.
Second, the gas turbine flow meter equipment has strong functions, low power consumption and superior performance. When it is sold in the industry, it is found that the functional advantages of this kind of flowmeter will be more perfect. In many gas distribution stations or gas When promoting in the station, I found that the advantages will be more diversified, and there are more and more advantages. Third, the configuration of the natural gas turbine flow meter instrument is more perfect, and it will be more and more widely used. As long as you take a fancy to the above clarity, it will be more convenient in the process of normal use. After this is used in many gas distribution stations, it is found that the measurement accuracy is higher.
Beijing Sincerity Automatic Equipment Co., Ltd is a research and development center, focusing only on one type of flow meter, the Coriolis mass flow meter, which has been in use for 33 years. Our Coriolis mass flow has reached the international leading level. We provide three types of Coriolis mass flowmeters, including U-shaped, micro-bent V-shaped and triangular, to meet the different needs of different industries. We can provide coriolis flow meter with ultra high pressure of 100MPa, ultra high temperature of 350 C, and minimum temperature of -300 C. We can also measure ultra-high viscosity liquids, such as 70,000 cps glue. We have been very successful with gas measurements such as hydrogen. In addition, we have been very successful in two-phase / three-phase / multiphase flow liquid measurement. We support OEM services. You can even customize the internal software for Coriolis mass flow meters. We also support market agents. Find additional details at https://www.bjssae.com/.
Beijing Sincerity is the leader of the coriolis mass flow meters industries in China,who specialized in producing thermal mass flow meter,turbine flow meter,fork density meters and ultrasonic flow meter. In line with our collaborative approach to our customers we are also able to discuss tailor-made Service and Support Solutions designed specifically for your needs that can include such topics as training, instrument replacement agreements and instant service and repair.
It has been considered in the design that the steam becomes superheated, or it is difficult to determine which state it is in, or sometimes it is superheated and sometimes saturated, so the temperature and pressure compensation is adopted, and the above phase change has no effect on the measurement results. Considering saturated steam in the design, and adopting pressure compensation, the above-mentioned phase change will bring about a small error, that is, the compensation error caused by the density difference corresponding to the difference between the superheated steam temperature and the saturated steam temperature. The design is based on saturated steam, but temperature compensation is used, that is, the temperature of superheated steam is used as the saturation temperature to check the density table, which will generally cause large errors.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.